amdee
01-16 11:01 AM
Any update on this. I am also planning to go to the school with my I485 pending. Just wanted to make sure that I will not get ito any issues with my pending I485.
[QUOTE=mharik]Hi ,
Can you use portability(i.e, I-140 approved and I-485 pending more than 6 months) for studies in USA or outside US????
ANYONE????
[QUOTE=mharik]Hi ,
Can you use portability(i.e, I-140 approved and I-485 pending more than 6 months) for studies in USA or outside US????
ANYONE????
wallpaper angel and demon tattoos
IAMINQ
03-18 05:19 AM
Dear Friend,
We don't know what was your understanding between you and your ex-employer, It seems to me that you voluntarily paid money when you are not supposed to. I am also not sure how you got an H1 transfer without getting paid... Lot of question marks ??? Its better you talk to a qualified attorney and get their opinion. You can definetly go after the ex-employer for not paying you which they are legally bound too.. You will get all your $$$$.
We don't know what was your understanding between you and your ex-employer, It seems to me that you voluntarily paid money when you are not supposed to. I am also not sure how you got an H1 transfer without getting paid... Lot of question marks ??? Its better you talk to a qualified attorney and get their opinion. You can definetly go after the ex-employer for not paying you which they are legally bound too.. You will get all your $$$$.
small2006
07-22 06:18 PM
Yesterday, I received one more appointment notice for a different day (one day after the original appointment). This is in addition to the appointment notice that I had received earlier.
Has this happened to anybody before? Is it just a mistake on the part of USCIS? I am planning on going there as per the first notice.
Any ideas from anybody?
Has this happened to anybody before? Is it just a mistake on the part of USCIS? I am planning on going there as per the first notice.
Any ideas from anybody?
2011 angels wings tattoos. angel
sathweb
01-21 12:57 PM
Dil ko khush rakhne ke leye, Ghalib yeh khyal be aacha hain. :rolleyes:
(Atleast his thought is good, to keep your mind at peace)
I agree, thought or wish is good. If it is a thought/wish it would start with "I wish" , "I believe" or �I think� etc. His sentence starts with a rumor. Starting a rumor with the intension of misleading people is not good. His/her intensions are very clear.
(Atleast his thought is good, to keep your mind at peace)
I agree, thought or wish is good. If it is a thought/wish it would start with "I wish" , "I believe" or �I think� etc. His sentence starts with a rumor. Starting a rumor with the intension of misleading people is not good. His/her intensions are very clear.
more...
greenguru
03-31 03:26 PM
Yes. I applied for EB2 again in Jan 2009 and ported from EB3 to EB2.
So that is why it took me so long
So that is why it took me so long
sweet23guyin
11-15 11:08 AM
I am having tough time in getting an appointment with my local Representative and let them know what out problems are. And now this DEC bulletin is making my head spin.
---may be this bulletin will push me more in getting just an appointment--
:cool:God bless America:cool:
---may be this bulletin will push me more in getting just an appointment--
:cool:God bless America:cool:
more...
desi485
01-14 03:28 PM
Today me and my wife got our CPO emails. Mine was filed in Eb3 and my wife's was in Eb2. I got my approved though my wife.
I've been in US for 10 years... now i've two things to do
1. Wonder was it really worth this wait.
2. Move to the citizen line.
thanks IV, for all the support.
I'll not be going anywhere..My life has been on IV for all these years and now i don't know what to do because I've been addicted to come to IV every hour of my life these past years. I still remember pressing F5 during the july fiasco bulletin.
:cool:
Congrates! This may be useful information for you: check it out (http://immigrationvoice.org/wiki/index.php/US_Life_After_GC)
I've been in US for 10 years... now i've two things to do
1. Wonder was it really worth this wait.
2. Move to the citizen line.
thanks IV, for all the support.
I'll not be going anywhere..My life has been on IV for all these years and now i don't know what to do because I've been addicted to come to IV every hour of my life these past years. I still remember pressing F5 during the july fiasco bulletin.
:cool:
Congrates! This may be useful information for you: check it out (http://immigrationvoice.org/wiki/index.php/US_Life_After_GC)
2010 dark angel tattoos. free angel
amitkhare77
08-10 01:01 PM
I dont think so there is any wait period. I asked them after a year and they said OK we can do this. As per the admin - If I would have told them earlier they could have started much earlier. I did not ask them due to bad economy in late 2008-2009
Thank you my_gc_wait and amitkhare77 for your suggestions.
One last question to amitkhare77, how long did it take after you joined your new employer to file EB2.
Thank you my_gc_wait and amitkhare77 for your suggestions.
One last question to amitkhare77, how long did it take after you joined your new employer to file EB2.
more...
wleebrown
November 14th, 2007, 07:26 AM
Keith,
My sensors always seem to be dust magnets ... probably because I shoot with mostly primes and switch lenses a lot outdoors and in places that the lens just probably shouldn't be off the camera.
The site Mats recommends looks like it might have some good instructions, but the best advice I've been given was buy a Rocket blower (it's just a big bulb type blower that's shaped like a rocket for about $20). Most of the time 3 or 4 blasts of air with the rocket blower does the trick. (Never use canned air by the way.) And be careful how far you insert the end of the blower into your camera once the mirror is locked.
Shortly after buying a new 30D I got a little overzealous and smeared the end of the blower across the sensor. After pulling my heart back out of my feet, because I was certain I'd destroyed my new camera, and reading several sites like the one above, I violated all the rules and used standard cotton swabs my wife had in the bathroom (because it was the weekend and I live in the country where camera stores and medical supply shops are not close by or open) and I was able to easily clean the smear I had created across the sensor. The only problem I've had since was more dust.
It's kind of scary the first time, but in reality it is not brain surgery. If you use due care and the right kinds of material, you should have no problem removing the dust yourself. At $75 a cleaning, if I took my camera in every time I had a little dust I would have to give quit shooting.
Blessings,
Lee
My sensors always seem to be dust magnets ... probably because I shoot with mostly primes and switch lenses a lot outdoors and in places that the lens just probably shouldn't be off the camera.
The site Mats recommends looks like it might have some good instructions, but the best advice I've been given was buy a Rocket blower (it's just a big bulb type blower that's shaped like a rocket for about $20). Most of the time 3 or 4 blasts of air with the rocket blower does the trick. (Never use canned air by the way.) And be careful how far you insert the end of the blower into your camera once the mirror is locked.
Shortly after buying a new 30D I got a little overzealous and smeared the end of the blower across the sensor. After pulling my heart back out of my feet, because I was certain I'd destroyed my new camera, and reading several sites like the one above, I violated all the rules and used standard cotton swabs my wife had in the bathroom (because it was the weekend and I live in the country where camera stores and medical supply shops are not close by or open) and I was able to easily clean the smear I had created across the sensor. The only problem I've had since was more dust.
It's kind of scary the first time, but in reality it is not brain surgery. If you use due care and the right kinds of material, you should have no problem removing the dust yourself. At $75 a cleaning, if I took my camera in every time I had a little dust I would have to give quit shooting.
Blessings,
Lee
hair angels wings tattoos. angels
my2cents
06-16 04:27 PM
[QUOTE=das0]Predierock,
Can you please adivse on the following:
My wife is currently on H4.
She has a H1b approved for 3 years to start working on October 1, 2007.
Now, she gets a EAD (though my I-485) to start working on September 1, 2007 valid for 1 year only.
She has a job and the company would like her join asap.
Questions are:
1. Will her EAD (I-485 pending) cancel her H1B approval for the company?
NO, I-485 doesn't cancel anything. H1b is approved for her sponsored by company. Basically it is status you need to maintain
2. Can she work only Sept 1 - Spet-30 on EAD and then fall-back on her H1B (Oct 1 - later) for next 3 years?
Yes. i believe she can work on EAD during that period, she is in 485 pending status. and she can switch back to H1b. I-9 form needs to be updated accordingly.
We know that H1b is approved and all set for 3 years but Green-Card-EAD is only valid for 1 yr only and sometimes renwal takes time and $$ and bit riskly. So we cant decide if we should stick to her alreay approved H1b or fall back on EAD.
Please advise folks
Can you please adivse on the following:
My wife is currently on H4.
She has a H1b approved for 3 years to start working on October 1, 2007.
Now, she gets a EAD (though my I-485) to start working on September 1, 2007 valid for 1 year only.
She has a job and the company would like her join asap.
Questions are:
1. Will her EAD (I-485 pending) cancel her H1B approval for the company?
NO, I-485 doesn't cancel anything. H1b is approved for her sponsored by company. Basically it is status you need to maintain
2. Can she work only Sept 1 - Spet-30 on EAD and then fall-back on her H1B (Oct 1 - later) for next 3 years?
Yes. i believe she can work on EAD during that period, she is in 485 pending status. and she can switch back to H1b. I-9 form needs to be updated accordingly.
We know that H1b is approved and all set for 3 years but Green-Card-EAD is only valid for 1 yr only and sometimes renwal takes time and $$ and bit riskly. So we cant decide if we should stick to her alreay approved H1b or fall back on EAD.
Please advise folks
more...
thomachan72
11-12 06:11 AM
Hi was an educational evaluation submitted along with the application?? Usually for degrees from non-US universities while filing the H1b application they require us to submit an educational evaluation along with copies of the certificates/transcripts. If you had not got your wife's degree evaluated and submitted that report then that might have triggered this rfe??
hot Angel Tattoo On La Ink
vinzak
04-13 06:53 PM
i remember someone posting right here in IV that they got their GC when PD was not current. USCIS later asked for the GC back cuz it was given in error.:) To make things worse the poor guy obviously didnt renew his EAD and couldnt work.
So even if you get GC out of turn, I believe the correct thing to do is to return it. Or it can be more problems.
Here's the link on that topic:
http://immigrationvoice.org/forum/forum105-immigrant-visa/659959-gc-received-in-error.html
So even if you get GC out of turn, I believe the correct thing to do is to return it. Or it can be more problems.
Here's the link on that topic:
http://immigrationvoice.org/forum/forum105-immigrant-visa/659959-gc-received-in-error.html
more...
house baby angel tattoo design
reddymjm
03-11 01:02 PM
I just emailed mine to info@immigrationvoice.org.
tattoo Angel and cherub tattoos are
punjabi
07-18 06:59 PM
You should get RFE based on the missing employment letter. Rejections are related to more inappropriate cases. I know one case, the guy did not send his passport copies and he got an RFE.
Hope this helps ease the tension!
Hi Gurus,
I filed my 485 application on July 2nd. But my employer/lawyer did not attach the employment verification letter in the package. Is USCIS going to reject my application because of that or they will send an RFE. Please advise..
Hope this helps ease the tension!
Hi Gurus,
I filed my 485 application on July 2nd. But my employer/lawyer did not attach the employment verification letter in the package. Is USCIS going to reject my application because of that or they will send an RFE. Please advise..
more...
pictures small angel tattoo designs
zigglar001
11-10 12:35 PM
Hi ,
My 180 days have passed and I have an approved 140. My job was filed in 2002 in EB2 as s/w engg. In this job i moved to project manager in IT. Now I am getting a job offer for an awesome company, nice pay and as a program manager. the role is still in IT but it will be more managing.
Would this be a safe bet to take by choosing AC-21?
Please reply. i need to respond to them in a couple of days....
My 180 days have passed and I have an approved 140. My job was filed in 2002 in EB2 as s/w engg. In this job i moved to project manager in IT. Now I am getting a job offer for an awesome company, nice pay and as a program manager. the role is still in IT but it will be more managing.
Would this be a safe bet to take by choosing AC-21?
Please reply. i need to respond to them in a couple of days....
dresses pictures of angel tattoos.
rb_248
03-31 03:19 PM
Thanks all for your help and great inputs. IV has helped me a lot.
I wish you all the best ...
TKs, GG
Congrats. Don't lose it. Enjoy your freedom.
I wish you all the best ...
TKs, GG
Congrats. Don't lose it. Enjoy your freedom.
more...
makeup Cute-Angel-Tattoos-angel-
jettu77
03-12 10:22 AM
Congratulations!
girlfriend angels wings tattoos. angel
gccovet
07-16 08:39 AM
Hi,
Why would notification be necessary? Isn't an I-9 form (w/ EAD as proof of work permit) being present at the employer's location sufficient?
I haven't heard of any employer "notifying" USCIS about an employee's EAD status!
Thanks!
Only I-9 is required.
gccovet
Why would notification be necessary? Isn't an I-9 form (w/ EAD as proof of work permit) being present at the employer's location sufficient?
I haven't heard of any employer "notifying" USCIS about an employee's EAD status!
Thanks!
Only I-9 is required.
gccovet
hairstyles angel tattoo pictures
rayoflight
12-21 01:18 PM
Hi All, I know that visa numbers are allocated per country basis (7% or so) but I would like to know how are the visa numbers allocated to EB1 / EB2 & EB3 Categories within a country.
For Ex: If Country A has 1000 Visa Numbers for a fiscal year how does USCIS divide them between EB1 / EB2 / EB3
Thanks in advance for your replies...
For Ex: If Country A has 1000 Visa Numbers for a fiscal year how does USCIS divide them between EB1 / EB2 / EB3
Thanks in advance for your replies...
EB3_SEP04
07-01 07:37 PM
Hi All,
I had a previous empoyer A > Then a Prefered Vendor B > Then a Client C.
Now I have transferred my H1 to a Preferred Vendor X & Still working on same project with the Client C, but with a different contract all togeather.
Preferred Vendor X > the Client C
Now the issues is , my previous employeer A is harassing me ( Vendor B is having no problems) , asking for money or filing a legal case agaist me,as I have signed a non-compete agreement with them. Can he do so ?? what can be the worst consequences?
Let me tell you one thing, "You've got guts, buddy", Congrats on the bold move. not many people dare to do that.
Can he do so? - Theoratically yes, practically: highly unlikely.
if he is a typical consulting guy with less than 50 emps, he won't do it, because such employers almost always make "adjustments" that puts them in extremely weak spot during such law suits. here are some examples:
- a guy was laid off, his new employer sent him on a project even before filing for his H1 transfer
-many consulting companies do not pay salary while the guy is on "bench"
- they many times knowingly/unknowingly commit tax/accounting fraud or regulatory mistakes that can cause serius consequences
- a friend of mine was interrviewed by a client and when the result was positive, his new would be employer called him at a McDonalds and asked him to sign the contract right there (within 30 minute of meeting), and my friend did. Now most people won't see anything wrong in here. but a lawyer told me that my friend was not given enough time to read/understand a legal document and to talk to a lawyer ideally enough time is about 2 weeks. How many small consulting companies give 2 weeks when the interview at client is clear?
In your case, the end client is not your employer's client. Ask him to show the contract between him and the end client.
bottom line of the story is: there are many defenses that one can play and win the case and/or even put the employer in trouble. That's why most small employers don't do much beyond sending a lawyer's notice (just to scare you enough to write down a check). A real nasty guy can even go one step further and file a law suit only to withdraw it later if you decide to fiight it.
Good luck buddy!
I had a previous empoyer A > Then a Prefered Vendor B > Then a Client C.
Now I have transferred my H1 to a Preferred Vendor X & Still working on same project with the Client C, but with a different contract all togeather.
Preferred Vendor X > the Client C
Now the issues is , my previous employeer A is harassing me ( Vendor B is having no problems) , asking for money or filing a legal case agaist me,as I have signed a non-compete agreement with them. Can he do so ?? what can be the worst consequences?
Let me tell you one thing, "You've got guts, buddy", Congrats on the bold move. not many people dare to do that.
Can he do so? - Theoratically yes, practically: highly unlikely.
if he is a typical consulting guy with less than 50 emps, he won't do it, because such employers almost always make "adjustments" that puts them in extremely weak spot during such law suits. here are some examples:
- a guy was laid off, his new employer sent him on a project even before filing for his H1 transfer
-many consulting companies do not pay salary while the guy is on "bench"
- they many times knowingly/unknowingly commit tax/accounting fraud or regulatory mistakes that can cause serius consequences
- a friend of mine was interrviewed by a client and when the result was positive, his new would be employer called him at a McDonalds and asked him to sign the contract right there (within 30 minute of meeting), and my friend did. Now most people won't see anything wrong in here. but a lawyer told me that my friend was not given enough time to read/understand a legal document and to talk to a lawyer ideally enough time is about 2 weeks. How many small consulting companies give 2 weeks when the interview at client is clear?
In your case, the end client is not your employer's client. Ask him to show the contract between him and the end client.
bottom line of the story is: there are many defenses that one can play and win the case and/or even put the employer in trouble. That's why most small employers don't do much beyond sending a lawyer's notice (just to scare you enough to write down a check). A real nasty guy can even go one step further and file a law suit only to withdraw it later if you decide to fiight it.
Good luck buddy!
desi3933
06-25 09:46 AM
As long as she is not drawing a Salary, she is fine. She can continue to manage the business.
This is not correct.
Managing the business comes under employment authorization whether or not salary is drawn by the owner.
_________________
Not a legal advice.
This is not correct.
Managing the business comes under employment authorization whether or not salary is drawn by the owner.
_________________
Not a legal advice.
0 comments:
Post a Comment